Choose Your Roofer Wisely for the Best Quality Roofing in Edmonton

Whether you need simple roof repairs or you need a complete replacement of the roofing system, contractors specializing in residential roofing in Edmonton will complete the task professionally. Roofers in Edmonton are trained to perform all kinds of roof installations, repairs, and replacements using the best products available in the industry. To be on the safe side, you need to choose a roofing contractor who offers an impressive warranty, not just on parts but also on their workmanship. If your home’s roofing system needs attention, whether small or large, it is imperative that you identify a contractor that can deliver at a reasonable cost.

Each type of roofing presents unique pros, cons and challenges during repair or installation. Fortunately, roofers in Edmonton are familiar with the products and are capable of handling all sorts of roofing styles, including:

• Metal Shingles
• Cedar Shake Roofs
• Shingle Roofs
• Clay Tiles
• Mediterranean Style Roofs
• Slate Tiles
• Standing Seam Metal Roofs

Sometimes when conducting roofing inspections or service, roofers in Edmonton often discover that the installation job was done incorrectly and homeowners are forced to do an early replacement. However, when you entrust the project to a specialist in residential roofing in Edmonton, you can be saved the trouble and expense of having your entire roof replaced. Since the professionals always strive to deliver quality services, you can expect your roofing system to last even longer. Even so, there are instances when a roof replacement cannot be avoided. When a replacement is inevitable, the roofing experts take extra care to make sure your new roofing system is installed properly by following all the recommended steps. Consequently, the roof lasts longer and keeps you and your family safe.

Protecting your home means you must maintain your roofing structure. You will be glad to know that roofers in Edmonton do much more than build roofs. When it comes to residential roofing in Edmonton, the contractors offer a variety of services that are tailored to help homeowners to maintain and boost the longevity of their roofs. Installation, inspection, repair, and replacement are some of the services you can expect from these specialists.

When you call in roofers in Edmonton to inspect your roof before giving you an estimate, they need to do a thorough job. They shouldn’t just check the roof’s surface; they should check below it as well and make sure the flashing and the base are secure. On top of that, the potential roofing contractors should check the gutters and inspect the attic. This should be done to ensure that the insulation and ventilation are in good order. The contractors provide written estimates that help you make a decision. Therefore, whenever you experience issues with your roofing, do not hesitate to consult specialists offering services related to residential roofing in Edmonton. No matter the magnitude of your roofing project, you can depend on competent and highly reputable roofing contractors to get the job done. Remember, the longevity of a roof can only be guaranteed when the installation or repair job is done correctly.

Some Common Air Conditioner Issues in Victoria, BC

Improper operation is one of the leading causes of heating and air conditioning system malfunctions. When your air conditioner is running, close all doors and windows to keep the system operating properly and efficiently.

Other common issues that might be experienced with heating and air conditioner systems are generally caused by faulty or poor installation, poor service and maintenance procedures, and inadequate system maintenance. Improper AC installation might lead to low airflow and leaky ducts. In many instances, the refrigerant charge is not within the level recommended by the manufacturer’s specifications. Failure to charge refrigerant properly during installation could potentially lead to the impaired performance of your unit. The less qualified service technicians or contractors often fail to discover refrigerant charging issues. Some of the less experienced technicians also worsen the situation by adding more refrigerant than is necessary.

The reputable heating systems and air conditioning unit manufacturers design and build sturdy, high-quality products. In the event that your air conditioning unit suffers a malfunction, you can begin troubleshooting by checking the circuit breakers or fuses. Allow the unit to cool down for five minutes before resetting the breakers. Below are some of the vital issues you need to look out for. If you doubt your skills, you should never hesitate to call a specialist to fix your AC system.

  1. Refrigerant Leaks

If you suddenly notice that the refrigerant level of your air conditioning in Victoria, BC is running low, then either it is leaking or it was undercharged during installation. A well-trained HVAC contractor should be able to fix any leaks, test the repairs, and charge the system while ensuring the right amount of refrigerant is filled. Remember, the efficiency and performance of your air conditioner will reach optimal levels when the manufacturer’s specifications are adhered to during the refilling of the refrigerant charge.

  1. Failure To Keep Up With Maintenance Requirements

If you ignore your air conditioning unit until the coils and filters become too dirty, the unit will no longer work properly. Furthermore, the fans and compressor unit might fail prematurely. To avoid these problems, it is highly recommended that you adhere to the maintenance requirements recommended by your HVAC contractor.

  1. Sensor Problems

Heating systems and air conditioners are fitted with a thermostat sensor located at the rear of the system control panel. The sensor measures temperature flowing into the evaporator coils. When the sensor is not correctly positioned, your air conditioner might behave erratically or cycle constantly. The thermostat sensor should be positioned just near the coil without touching it.

  1. Electric Control Failure

The fan and compressor controls wear out over time due to the fact that they constantly switch on and off, which is common with the oversized systems. Since the corrosion of terminals and wires is yet another problem that affects these systems, it is advisable that you call a professional HVAC technician to check these components on a regular basis.

  1. Drainage Problems

When it’s overly humid outside, you should carefully inspect the condensate drain just to make sure there is no clogging; it should drain properly. Note that room air conditioners might not drain properly when the mounting is not level.

6 Warning Signs that Your Furnace Needs Repair

6 Warning Signs that Your Furnace Needs Repair

If you have ever woken up at night, your body is freezing during winter, and your windows are not open, your furnace may have broken down. This could be a terrible experience because you would have to endure many chilly nights as you wait for a furnace repair company to carry out the required service. But if you know how to detect the early signs of impending furnace repairs and you arrange for regular furnace cleaning, you won’t need to put up with the cold for several nights. Here are some warning signs you must never ignore.

1 Strange Smells
Most furnaces may have a strong smell of fuel, particularly when you turn them on for the first time after a year. This smell usually dissipates as the unit continues its operation. But if you perceive a strong smell around the unit, or an odour that comes up and refuses to go away, your furnace may need a checkup. These smells may be due to a gas leak, or excessive dust because of irregular furnace cleaning.

2 The Unit is Hard to Start
As a furnace gets older, you may find it difficult to start or to keep it running smoothly. If you need to restart it several times or it keeps tripping off periodically during the day, it is time to call for repairs. This situation is usually due to disconnected wiring or a faulty thermostat. Calling your furnace repair company for an inspection and replacing the damaged component will correct the situation.

3 A Yellow Pilot Light
Always pay close attention to the colour of the pilot light. When your furnace is working normally, the pilot light should be blue. But when the colour changes to yellow or another colour, it is most likely due to a problem with ventilation. The colour change may also be because of impeded movement of waste gases like carbon monoxide. This is a major issue that needs urgent attention to prevent serious health problems.

4 Insufficient Heat
A furnace is designed to heat up your home. When it is no longer providing the expected amount of heat, it’s time for furnace repair. If you have performed routine furnace cleaning and you have adjusted the thermostat without any improvement, your furnace needs to be serviced. The most common reason for insufficient heat is leaking ductwork or a faulty thermostat.

5 Poor Air Quality
The state of your furnace will have a direct effect on the air quality in your house. A system that is poorly maintained will allow dirt, dust, bacteria and different types of particles to move through the air in your home. This can cause various health problems like coughing, colds, allergies and asthma. Sometimes, duct cleaning may resolve the issue. But it is better to call for professional assistance if cleaning does not improve the air quality.

6 Abnormal Noises
Every furnace will make some operational noise, but very loud and prolonged noises show that there is a serious problem. Listen carefully to any noise you hear and carefully describe them to the technician who services your furnace. Any squealing noises or whistling indicates that the fan or belt may be faulty or the bearings are damaged.

If you notice any of these warning signs, you need to consult your HVAC contractor immediately. Don’t hesitate because using a furnace under such conditions could cause permanent damage or lead to more expensive repairs in the future.